Turn off read-only fiile system??

General support for the Pi-Star System
Post Reply
G8OGJ
Posts: 27
Joined: Mon May 06, 2019 8:13 pm
Location: Matlock
Contact:

Turn off read-only fiile system??

Post by G8OGJ » Thu Oct 10, 2019 4:20 pm

Folks,

Is it possible, and if so is it dangerous, to set the pi-star such that the file system is no longer read-only? The reason for this is that I want to run boinc-client in the background on my system but it is failing to start, in all probability because the file system appears to be full.

In the alternative, I might have to add a second disk (USB drive) or separate partition for boinc, which I don't really want to do.

Grateful for your thoughts.

Ian
Amateur Radio Station G8OGJ

KE7FNS
Posts: 416
Joined: Wed Apr 17, 2019 11:11 pm

Re: Turn off read-only fiile system??

Post by KE7FNS » Thu Oct 10, 2019 10:07 pm

Heres a post I wrote about how to get it to RW mode 24/7

viewtopic.php?f=3&t=2059&start=40#p10286
All views, comments, posts and opinions shared are entirely my own.

G8OGJ
Posts: 27
Joined: Mon May 06, 2019 8:13 pm
Location: Matlock
Contact:

Re: Turn off read-only fiile system??

Post by G8OGJ » Fri Oct 11, 2019 9:38 am

Thanks for the input - based on what I have read there is no need to consider the risk issue - its just too complicated for my simple purpose, especially if I later have to update to a new version.

Having read that post I am minded to put in a USB drive for the boinc client to use. It can do what it likes with that and there is no risk to the pi-star partition.

I'm struggling to understand how I was able to install boinc-client and run it for several days until I had to restart, but there you are.

Best regards,

Ian
Amateur Radio Station G8OGJ

G8SEZ
Posts: 52
Joined: Fri Apr 13, 2018 8:26 pm

Re: Turn off read-only fiile system??

Post by G8SEZ » Fri Oct 11, 2019 12:31 pm

G8OGJ wrote:
Fri Oct 11, 2019 9:38 am
Thanks for the input - based on what I have read there is no need to consider the risk issue - its just too complicated for my simple purpose, especially if I later have to update to a new version.

Having read that post I am minded to put in a USB drive for the boinc client to use. It can do what it likes with that and there is no risk to the pi-star partition.

I'm struggling to understand how I was able to install boinc-client and run it for several days until I had to restart, but there you are.
Probably because the partition ended up in RW mode due to a hard-to-find bug that leaves deleted files open as far as one of the services is concerned.

See viewtopic.php?f=3&t=741 for more evolving details.
--

Brian G8SEZ

Post Reply