My simple test config routes one TG (3670) to HBlink, and all other traffic to Brandmeister. And it works... kinda. The problem is that if I send a group call to TG 3670 I see the call received by the hotpot on the RF side but the call is not sent to HBlink, in fact if I tail the DMRGateway log file I do not see any traffic being sent to the DMRGateway process at all. That is, until I key the TG 3670 for 5 times in succession, then everything works as expected... I see the call appear in the log and it is sent to my HPlink server. But at that point if I send a call to Brandmeister the same failure occurs, traffic is received on the RF side of the hotspot but not sent to Brandmeister until I send 5 transmissions, and then calls to Brandmeister work normally, but calls to TG 3670/HPlink fail, until I sent 5 transmissions to TG 3670 and HPlink path works again, at which time Brandmeister fails, and so on. The problem is reliably repeatable and for some reason the path always starts working on the fifth attempt.
I can't find any reason for this behavior and not sure where to go from here, I would assume that the config files are ok because routing to both paths (HBlink or Brandmeister) does work properly, but why only after a series of five transmissions and why does the other path then shut down?
I have included the DMRGateway config below.
Code: Select all
[code] [General] RptAddress=127.0.0.1 RptPort=62032 LocalAddress=127.0.0.1 LocalPort=62031 RuleTrace=0 Daemon=1 Debug=0 RFTimeout=60 NetTimeout=60 [Log] DisplayLevel=0 FileLevel=1 FilePath=/var/log/pi-star FileRoot=DMRGateway [Voice] Enabled=1 Language=en_GB Directory=/usr/local/etc/DMR_Audio [Info] Enabled=0 RXFrequency=438025000 TXFrequency=438025000 Power=1 Latitude=33.333333 Longitude=-133.333333 Height=0 Location="My city" Description="USA" URL=http://www.mw0mwz.co.uk/pi-star/ [XLX Network] Startup=950 Enabled=0 File=/usr/local/etc/XLXHosts.txt Port=62030 Password=passw0rd ReloadTime=60 Slot=2 TG=6 Base=64000 Relink=60 Debug=0 Id=3151234 UserControl=1 [DMR Network 1] Enabled=1 Address=18.104.22.168 Port=62031 TGRewrite0=2,9,2,9,1 PassAllPC=2 PassAllTG=2 Password="secret" Debug=0 Id=3151111 Name=BM_United_States_3103 [DMR Network 2] Enabled=0 Address=22.214.171.124 Port=55555 TGRewrite0=2,8,2,9,1 PCRewrite0=2,84000,2,4000,1001 Password="secret" Debug=0 Id=3159576 Name=DMR+_IPSC2-Australia [DMR Network 3] Enabled=1 Name=HBLink Address=126.96.36.199 Port=62030 TGRewrite=2,3670,2,3670,1 Password="secret" Location=0 Debug=0 TGRewrite0=2,11,2,11,1