No YSF room changes after update????

[W6CJ]

I recently installed the latest upgrade and update in a Zumspot Rpi.

Today, I tried changing from my default YSF reflector (Parrot in this case) to other reflectors I've already pre-set in an FT3D (America link, CQ UK and CQ California). This has always worked in the past. No luck, I had to go to the dashboard in order to change the YSF default reflector (or room) on my Pi. Could not change it back via the radio.

Tried "ALL" and "SEARCH AND DIRECT" in the FT3D and it always comes back with nothing (4 beeps).

Tried rebooting the Zum Rpi. Still no YSF room changes via my radio. Still no "ALL" or "SEARCH AND DIRECT"

C4FM Transmission/reception on reflectors, and echo tests on the "Parrot" still work.

Radio controlled reflector changes still work in D-Star.

Anyone else had this issue and how did it get resolved?

Thanks for helping, 73
Jay
W6CJ
(lastradioman AT gmail DOT com)

[K2MTB]

I am having the same issue. Posted a reply on YSF group and also have a post here in General. Looking for help.

[K2MTB]

Andy replied to my post "YSF - unable to get to Reflector List" on the YSF Specific Support group that I posted 2.8.21 at 8:55 PM. . I replied that I continue to have the problem.

Hopefully we can get to the bottom of this. Appreciate any help.

[K2MTB]

Thanks to WC6J this turned out to be that both of us had our Pi-Star's set to Start Up in the Parrot Mode. We have now both changed our settings to NONE and it seems to work fine.

If you experience this change your default start up to NONE.