wpa_supplicant.conf causing a boot loop

[2E0LIG]

OK I have raspbery pi 3 A+ and cant for the life of me get this pi-star working.

I flash the SD card in a linux environment on zorin OS using etcher.

Now if I add the wpa_supplicant.conf to the boot section on the SD Card as stated to do, it creates a boot loop the pie just keeps displaying the first image below and rebooting time and time again never actualy loading pi-star.

If I leave out the wpa_supplicant.conf from the boot section on the SD Card then pi-star loads but I cant access it anywhere it tells me in the second image.

Can anyone help

[2E0LIG]

creating it with this website under pi tools WI-FI generator.

[2E0LIG]

managed to get it working using pi writer And my mobile as all of my computers in the house have no wi-fi all ethernet conneted to the router
Unfotunatly though after a reboot of the pi it just halts saying

kernel panic not syncing vfs unable to mount root fs on unknown-block (179,2)

[2E0LIG]

kernel panic not syncing vfs unable to mount root fs on unknown-block (179,2)

You've either got SD card issues (counterfeit, or just incompatible), or whatever you are using to write the image is not working correctly.

compatibility list:
https://elinux.org/RPi_SD_cards

Get a different brand/size of SD card and reimage.

Hi.
Yes although I had tried 4 diferent Sandisk Ultra's the problem persisted so went over asda and bought a new SD card 32gb Kioxia Eceria (toshiba I belive) now all working great.

Yhanks for the help