DMR2YSF - DMRGateway

[KB0JWR]

I have a ZumSpot PI Zero W from Radio Shack configured for DMR & DMR2YSF with DMRGateway and connected to FCS00327 (Nebraska Hub).

I have a connection and it seems to work with a couple weird oddities...

1- Most all people I hear as received show up as MY DMR ID # (name, city, state etc...) I believe this is due to folks on the FCS without a DMR ID the system just fills in my info when receiving bad or no ID.

2- I keep getting a "Connect" announcement over and over while connected... sometimes once every 5 min or so... sometimes once every 15/30 sec.

I would rather NOT get the connect announcements due to loosing the received audio of station I am listening to goes away while the announcement is happening..

regards

kb0jwr
Matt - Loup City, NE, USA

[KB0JWR]

NOTE:

I am running ver 4.0.0-RC4 updated today to Dashboard 20191220 and still have same (2) issues.

I originally set up runing 4.1.0-RC6, however was told I could not be heard by anyone not on DMR world when I was connected to the 7095919 Super Freq. only the folks on the DMR 420 could hear me...those on the YSF 7095919 had no audio.

I downgraded to 4.0.0-RC4 and both side could hear me...

[M1DNS]

4.0 is deceased.

4.0 is out of production and no longer supported.

Sent from my SM-G935F using Tapatalk

[KB0JWR]

I have re-formatted and re-flashed the CompactFlash card for Pi-Star 4.1.0 RC4 and did all the updates and upgrades to the current RC7. Dashboard has been upgraded to 2019 1220

I still have the same two issues


Sent from my iPhone using Tapatalk