forum.pistar.uk

I have sainsmart MMDVM Hotspot WiFi Digital Voice Modem Kit with Raspberry Pi Zero W and 3.2 Inch LCD
Device transmits all modes but I can not receiving nothing. On side of handhelds I receive all but can not transmit nothing to device.
What is the reason? How I can fix this issue?

Thanks for your help.

you might try on command (ssh in expert)

mmdvmcal
set frequency of the hotspot
F for up and f for down in frequency.
b for BER test.

Might give indication if there is rxoffset or txoffset in mmdvm config needed. My 2nd hotspot needed this offset to rx and tx properly.

Thanks for youu help.

Sorry because I'm not familiar with Linux.
This command needs root. How can i execute this command?

Simply type

sudo mmdvmcal