APRS (native) iGate (RX only) possible?

If its not Pi-Star / Radio related, this is where it belongs
Post Reply
Posts: 1
Joined: Thu May 03, 2018 8:08 pm
Location: Munich

APRS (native) iGate (RX only) possible?

Post by DB2FM »

Hi folks,

just a thought: would it be possible to receive APRS (on VHF e.g. 144.800 MHz) native and set-up an i-gate (at least for RX only)?

73 de Juergen db2fm 2628226
DB2FM [email protected] 2628226 and 2628326
Posts: 8
Joined: Mon Mar 23, 2020 5:11 am

Re: APRS (native) iGate (RX only) possible?

Post by WA1OKB »

You could install Direwolf and setup a VHF receiver and USB sound card (Something like the DRA-818V module from SV1AFN would do the job) or an RTL-SDR USB stick if you wanted a receive only igate (I'd recommend going a full igate with the DRA-818V, as that is more helpful to the APRS network)
Post Reply