Is it possible to perform an echo test in DStar using my mmdvm hotspot to a repeater or reflector to help me confirm I've got my TXOffset correct?
/W0EDN
Echo Test
Re: Echo Test
If you connect to the E module of the gateway or repeater then it should allow this without any other changes.
Someone else may offer detailed advice, I don't use DStar on my PiStars but this is the way it works on my openSPOTs.
Someone else may offer detailed advice, I don't use DStar on my PiStars but this is the way it works on my openSPOTs.
--
Brian G8SEZ
Brian G8SEZ