forum.pistar.uk

Nothing is impossible to actually say no, but some things are just simpler.

Can be done, but it won't be easy to do unless you have an above average understanding of ur Linux OS also remember what you end up with will not be pistar. It will only resemble pistar and if we make changes ur install ...

DMR_Hosts.txt updated
--- CURRENT DMR_Hosts.txt 2025-06-19 11:17:56.181635568 +0000
+++ UPDATED DMR_Hosts.txt 2025-06-19 12:18:36.091956503 +0000
@@ -1241,0 +1242 @@
+HB_IT_BAT 0000 hb-bat.duckdns.org passw0rd 62031


pushed to the pistar server as of 13:18 today (21/6/25)

Should get pushed out to ...

iz7exi wrote:Ok thanks for the reply.

NAME: HB_IT_BAT
UDP PORT:62031
STATIC IP: 82.85.236.36
DNS: hb-bat.duckdns.org

What password will your users be using to connect ??

Sent via smoke signals using my SM-G960F

Have a look at setting the hotspots rx offset. You can use the tool in the expert section or manually by adding an offset value say around 300 and add or subtract in small increments until you see ur keyups on the dashboard. Then continue adjustment to fine tune for lowest BER value. (Your aiming ...

that additional stuff doesnt work with MMDVM. MMDVM was reverse engineered to mimic parts of wires, its not a full replacement. You wont get any of that. WX, emmcom, news etc.

Sent via smoke signals using my SM-G935F

Use the search feature and search eg. GB, USA, or DL etc. The list you get will be centred on that country. Making the list much shorter. Or use part of the reflector name as a search.


Else look at the dvref listings and use the reflectors listed 5digit reflector no. with dtmf linking
etc ...

Post details here and we'll get it added.

Sent via smoke signals using my SM-G960F

Seeing you have revised a post from 2020 what pistar release are you using?
earlier releases 3.4.** and (the v.short lived) 4.0.* series have now been dropped from support. if its one of these, youll see no more updates for those releases.

Sent via smoke signals using my SM-G935F

If your using a dynamic ip address for ur reflector the only way pistar can follow ur ip address is by running a host update. The update process defaults to pulling updates a couple times throughout the day it doesnt know when ur ip address will update. If it updates after your ip gets renewed, then ...

N5KWL wrote: I wonder if the author is aware. Any response from anyone would be appreciated.

Tem Moore N5KWL

Yes, totally aware. in fact the change was implemented by Andy himself.

Sent via smoke signals using my SM-G935F